Menu
Search

Shop

HomeProductsChemicalsPool ChemicalsCleanersBioGuard SaltScapes Cell Cleaner (1 QT)

BioGuard SaltScapes Cell Cleaner (1 QT)

BioGuard SaltScapes Cell Cleaner (1 QT)

$21.99

  • Strong and highly effective formula
  • Removes chalky white-calcium scale deposits from cell
  • Works in as little as 15-30 minutes
  • Easier to handle than other acid cell cleaners

Out of stock

Description

Benefits:

  • Removes hard water scale for chlorine generator cell
  • Prolongs life of generator cell
  • Clean generator cell a minimum of once a year
  • Special scale inhibitor ingredient

What it does:

One of the critical parts of any chlorine generation system is the generation cell. Water passes over the cell plates where an electrical current is passed through the water. The electrical current reacts with the salt in the water to create the chlorine needed to sanitize. This process is called electrolysis. This process can also cause calcium salts to coat the cells. Calcium is an important component of good water balance in all pools. If a coating of calcium is allowed to build up it will greatly affect the performance of your salt water chlorination system and potentially shorten the life of your cell. Even a small amount of calcium coating can have an affect.

All chlorine generation cells need to be chemically cleaned periodically. SaltScapes saltwater pool care Cell Cleaner has been developed to remove calcium build up on cells. It is highly effective on calcium carbonate scale, calcium phosphate scale, and calcium sulfate scale when used as directed. All cells should be cleaned a minimum of once a year at the beginning of the season. BioGuard recommends visually inspecting your cell for scale every 2 months as more frequent cleaning may be needed. Review your chlorine generation system’s owners manual for additional information.

When/Why does ALEX recommend:

ALEX recommends Cell cleaner based on the last date of cell cleaning input and on the presence of metals or scale buildup.

Application instructions:

  1. Turn off circulation system and remove cell according to manufacturer’s instructions.
  2. Cap one end of the cell with a water tight cap and place the cell (cap side down) into a clean, empty 5 gallon plastic bucket.
  3. Fill the capped cell with SaltScapes Cell Cleaner. NOTE: If there is excess Cell Cleaner left in the bottle after filling the cell, discard into the deepest end of the pool.
  4. Soak for 15 – 30 min.
  5. After the soak time, pour the contents of the cell into the deepest end of the pool.
  6. Rinse the cell with a garden hose.
  7. Reinstall cell and restart circulation.
  8. Rinse any spilled solution out of the bucket and off of surrounding surfaces.

Ready to cool off?
contact us today

  • This field is for validation purposes and should be left unchanged.
Call Now Button