Contains SunShield® and SilkGuard®
- SunShield protects chlorine from sunlight so you use less product than with unstabilized chlorinating products.
- SilkGuard softens the water and coats metal surfaces to protect against rusting and metal staining and binds hard water components to reduce scaling.
What it does:
• Kills bacteria and controls algae
• Prevents metal staining and corrosion
• Reduces scale formation
• Makes water soft and smooth
SilkGuard protects your pool equipment for longer life. It coats metal surfaces protecting them from corrosion and rust. It prevents scale formation in your pool circulation system and on pool surfaces. SilkGuard makes the water soft and smooth.
These sticks also contain SunShield®, which protects chlorine from sunlight, so you use less.
This sanitizer will last longer compared to chlorine products such as liquid bleach or calcium hypochlorite, as it contains SunShield®, which protects chlorine from sunlight, so you use less. It’s the perfect solution for clear, silky smooth, inviting pool water.
When/Why does ALEX recommend this product:
In the Maintenance section of a water analysis if Silk Sticks are selected as the sanitizer.
Application rate and instructions:
Feeder or Floaters: Add 16 ounces (approximately 23 tablets) per 10,000 gallons of pool water to feeder or floater. Adjust the feeder or floater following manufacturer’s instructions to establish a free available chlorine level between 1–4 ppm. Allow water to circulate at least 4 hours and then test for the free available chlorine level.
Add 16 ounces (approximately 23 tablets) per 10,000 gallons of pool water per week, or as often as needed, to the floater or feeder to maintain a constant free available chlorine level of 1-4 ppm. Sunlight, rainfall, temperature, number of swimmers, and frequency of pool use affect the rate of chlorine residual loss so check the floater or feeder often and refill as needed